 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Hydraulic Test Stands for hose test, fittings test,
valves, filters, rigid tube, Actuators, Cylinders and
other Hydraulic components
BI702 SL IMPULSE TEST STAND with Sliding Manifold
Max (Fluid) Temp 150° C (302° F), at test frequency
ranging from .05 to 1.5 Hz. The Waveform generated by
this unit is in accordance with:
· Square Waveform as: SAE J343 & ISO 6803
· Peak Waveform: ISO 6772
· Programmable waveform up to 20 points: Time ON/OFF
The Sliding Manifold feature meets ISO 6802
BI1001 - IMPULSE TEST STAND
This is one of the most largely used Impulse Test Stand.
It has programmable Square Wave form and Pressure Impulse
that meets DIN, SAE J343, ISO6803 and other specifications.
Max Test Pressure of 1,000 Bar (~14,500 psi), Max Oil Temp of
130°C(266°F) and frequency of pulse equal to 1HZ. Click on the
picture to download a pdf file with general SPECS for BI1001
Impulse Test Stand. (SAE J343 & SAEJ517)
BI1002 - IMPULSE TEST STAND - Peak Wave Form
This is another largely used testing system that generates a
Square Wave plus the capacity to run (Hitachi) Spike wave.
The programmable wave form has up to 20 different
Programmable points of Pressure Impulse that meets:
ARP603 & ARP1383; prEN2624, Mil-A-5503E; ISO 6772
and others SPECS. Max Test Pressure of 1,000 Bar
(~14,500 psi), Max Oil Temp 150°C(302°F) and frequency of
pulse ranging from: 0.5Hz to 1.5Hz
The Sliding Manifold is an optional that meets ISO6802,
simulating horizontal flexing movement.
Click on the picture to download a pdf file with general SPECS for
BI1002 Impulse Test Stand. Also runs SAE J343 & SAE J517
BI602AER – A combined Impulse Test Stand with two
independent Hot Chambers simulating Environmental testing.
The two chambers operate with test temperature of 135°C
(275°F) and Impulse Testing follows a programmable Peak or
Square Wave Pressure cycle. Max Oil Temp is 135°C.
Also runs SAE J343 & SAE J517
BIR800 – TEST STAND with Half OMEGA TEST - Rotation
Equipment designed to TEST flexible hydraulic rubber hoses. It
can run flexing and rotating testing up to 20 Programmable
wave points in accordance to the following norms:
Square Impulse Wave per SAEJ343 and ISO6803;
Impulses with peak per ISO 6772;
Impulse and flexing Test per ISO8032 (Half-Omega test);
Impulse and flexing Test per SAEJ1405 (Omega test).
Click on the picture to download pdf file with general Specs for
BIR800 Test Stand. SAE J343 & SAE J517
BURST TEST Model BPS 40/B
Burst test system with Maximum Pressure of 4,000 bar (about
57,000 p.s.i.),
BURST TEST without fittings. For hose manufacturers to Burst
Test hoses without fittinfgs: Click here.
BPSDVA – BURST TEST with VOLUMETRIC EXPANSION, BURST,
CHANGE OF LENGTH
BPDV – VOLUMETRIC TEST STAND in accordance with UNI EN
1402.
BPSDP1 – Test Stand for BURST TEST & DROP PRESSURE
FLUSH 4 – Flushing System with capacity to clean up to
4 hoses at a time, assuring contamination level better
than NAS6. Employs fluid compatible with hydraulic oils.
BIMAL s.r.l has an extensive experience designing and
building high quality Standard or Customized Test Stands for
Aerospace, Automotive, Hydraulic test and Mechanical
components,
BIMAL s.r.l Hydraulic test stand and Pressure testing systems,
are employed in a variety of hydraulic components such Flexible
and Rigid hoses, Fittings, Valves, quick-release Couplings (quick
disconnect), filters, valves, cylinders, actuators, tube testing and
more.
Click on the pictures to get specifications or visit manufacturer's
web page by clicking on the logo:
To receive additional information please contact a sales
representative or click Test Stand send us an email.
Hydraulic Test Stand, hydrostatic test stand, pressure testing and
others please contact our sales rep. We will be glad to mail a copy
of DVD showing products in operation.
valves, filters, rigid tube, Actuators, Cylinders and
other Hydraulic components
BI702 SL IMPULSE TEST STAND with Sliding Manifold
Max (Fluid) Temp 150° C (302° F), at test frequency
ranging from .05 to 1.5 Hz. The Waveform generated by
this unit is in accordance with:
· Square Waveform as: SAE J343 & ISO 6803
· Peak Waveform: ISO 6772
· Programmable waveform up to 20 points: Time ON/OFF
The Sliding Manifold feature meets ISO 6802
BI1001 - IMPULSE TEST STAND
This is one of the most largely used Impulse Test Stand.
It has programmable Square Wave form and Pressure Impulse
that meets DIN, SAE J343, ISO6803 and other specifications.
Max Test Pressure of 1,000 Bar (~14,500 psi), Max Oil Temp of
130°C(266°F) and frequency of pulse equal to 1HZ. Click on the
picture to download a pdf file with general SPECS for BI1001
Impulse Test Stand. (SAE J343 & SAEJ517)
BI1002 - IMPULSE TEST STAND - Peak Wave Form
This is another largely used testing system that generates a
Square Wave plus the capacity to run (Hitachi) Spike wave.
The programmable wave form has up to 20 different
Programmable points of Pressure Impulse that meets:
ARP603 & ARP1383; prEN2624, Mil-A-5503E; ISO 6772
and others SPECS. Max Test Pressure of 1,000 Bar
(~14,500 psi), Max Oil Temp 150°C(302°F) and frequency of
pulse ranging from: 0.5Hz to 1.5Hz
The Sliding Manifold is an optional that meets ISO6802,
simulating horizontal flexing movement.
Click on the picture to download a pdf file with general SPECS for
BI1002 Impulse Test Stand. Also runs SAE J343 & SAE J517
BI602AER – A combined Impulse Test Stand with two
independent Hot Chambers simulating Environmental testing.
The two chambers operate with test temperature of 135°C
(275°F) and Impulse Testing follows a programmable Peak or
Square Wave Pressure cycle. Max Oil Temp is 135°C.
Also runs SAE J343 & SAE J517
BIR800 – TEST STAND with Half OMEGA TEST - Rotation
Equipment designed to TEST flexible hydraulic rubber hoses. It
can run flexing and rotating testing up to 20 Programmable
wave points in accordance to the following norms:
Square Impulse Wave per SAEJ343 and ISO6803;
Impulses with peak per ISO 6772;
Impulse and flexing Test per ISO8032 (Half-Omega test);
Impulse and flexing Test per SAEJ1405 (Omega test).
Click on the picture to download pdf file with general Specs for
BIR800 Test Stand. SAE J343 & SAE J517
BURST TEST Model BPS 40/B
Burst test system with Maximum Pressure of 4,000 bar (about
57,000 p.s.i.),
BURST TEST without fittings. For hose manufacturers to Burst
Test hoses without fittinfgs: Click here.
BPSDVA – BURST TEST with VOLUMETRIC EXPANSION, BURST,
CHANGE OF LENGTH
BPDV – VOLUMETRIC TEST STAND in accordance with UNI EN
1402.
BPSDP1 – Test Stand for BURST TEST & DROP PRESSURE
FLUSH 4 – Flushing System with capacity to clean up to
4 hoses at a time, assuring contamination level better
than NAS6. Employs fluid compatible with hydraulic oils.
BIMAL s.r.l has an extensive experience designing and
building high quality Standard or Customized Test Stands for
Aerospace, Automotive, Hydraulic test and Mechanical
components,
BIMAL s.r.l Hydraulic test stand and Pressure testing systems,
are employed in a variety of hydraulic components such Flexible
and Rigid hoses, Fittings, Valves, quick-release Couplings (quick
disconnect), filters, valves, cylinders, actuators, tube testing and
more.
Click on the pictures to get specifications or visit manufacturer's
web page by clicking on the logo:
To receive additional information please contact a sales
representative or click Test Stand send us an email.
Hydraulic Test Stand, hydrostatic test stand, pressure testing and
others please contact our sales rep. We will be glad to mail a copy
of DVD showing products in operation.
______________________________________
Haidar, Inc. ______________________________________________________
_______________________________________________________________________________________________
Haidar, Inc. ______________________________________________________
_______________________________________________________________________________________________
